ATR300DCS | Dual Router Board Separator

Domestically produced technology with industrial precision for separating electronic boards.

Router ATR300 DCS

  • MODEL - ATR300 DCS
  • Double board separator router;
  • Suitable for medium and high production volumes;
  • High production performance and high process efficiency;
  • National production. Description: Equipment designed for the agile depaneling of boards with a high-resolution camera that facilitates programming, precision servo motors that enable excellent repeatability and low scrap. It has a silent and dedicated exhaust system to reduce board waste. It has two independent bases that can work alternately with the cutting head. It features an intuitive interface with easy operation, allows the creation and editing of cutting points, automatic Z-axis leveling through the probe sensor, reducing setup time, and has an IIoT (Industrial Internet of Things) system that allows real-time monitoring of the equipment, assisting in the production process.

    • Features

  • Complies with regulatory standards NR10 and NR12. The equipment's electrical installation complies with NR10; NR12 application:
  • Light curtain - protection during operation;
  • Emergency stop button;
  • Safety relay for monitoring the light curtain; ESD system for static control. ASCE - Atron Axis Control System. With a user-friendly human-machine interface and a CCD camera, programming cutting points becomes easy and time-efficient. The user can easily define cutting marking points via the camera and the virtual environment for the point table. The registration form data is easily visible and editable.

    • Datasheet

    1. Model: ATR 300 DCS
    2. Dimensions: 1120mm (W) x 1400mm (D) x 1500mm (H)
    3. Equipment Weight: 300kg
    4. Heads: 1
    5. Bases: 2
    6. Spindle: Electric
    7. Spindle RPM: 60,000 rpm
    8. Cutting Area Table 1: 300mm x 300mm
    9. Cutting Area Table 2: 300mm x 300mm
    10. Transmission System: Synchronous belt/Ballscew screw
    11. Transmission System: Linear guide
    12. Actuator System: Stepper motor/Easy Driver
    13. Driving Speed (Max): 300 mm/s
    14. Cutting Speed (Max): 50 mm/s
    15. Cutting Accuracy: ± 0.1 mm
    16. Positioning Accuracy: ± 0.1 mm
    17. Repeatability Positioning: ± 0.1 mm
    18. PCB Thickness: 0.5 ~ 2 mm
    19. Component Height: Top side 15 mm / Bottom side 45 mm
    20. Control System: Atron system integrated with PLC
    21. Monitor: 19"
    22. Exhaust: 2hp motor
      23.

    Guarantee

  • A) Equipment:
  • Full manufacturer's warranty for a period of 12 (twelve) months after the shipping date.
  • The shipping and return of parts under warranty to the manufacturer are the responsibility of the customer.
  • Defects caused by improper use are excluded from the warranty.
  • Full parts supply warranty for 10 years. B) Labor:
  • 12 (twelve) months after the shipping date.
  • Defects caused by improper use are excluded from the warranty.
  • For equipment installed outside the municipality of Manaus, the travel and accommodation expenses of ATROM's technical personnel, incurred during equipment installation, training courses, and technical assistance calls, will be the responsibility of the customer. Service Limitations: Technical assistance within the service warranty period will be free of charge during business hours - MON - FRI from 8:00 AM to 5:00 PM. Services performed in response to technical call requests outside of business hours will be charged per hour of actual work, regardless of the call's condition. Coverage: All parts and components subject to natural wear and tear, or wear caused by failure or lack of preventive maintenance and conservation, or by operational errors, or by intervention of third parties not qualified and not authorized by the manufacturer or supplier, are considered "out of warranty". Within the group of wear parts and components are all units of movement, friction, constant actuation and under the direct influence of an external supply source, such as compressed air, vacuum and water. The most common are: chains, guides, pulleys, toothed sprockets, belts, pulleys, bearings, bushings, air filters, filters in general, lenses, nozzles, limit switches, ejector valves, solenoid valves, pneumatic pistons, among other parts that are demonstrably parts and components subject to movement and wear. For services applied within this defined group, the technical hours spent on repair or replacement will be charged separately according to the standard technical hour rate table in effect at the time. Installation: This will be performed by an ATRON technician at no additional cost to the client; however, for equipment installed outside the municipality of Manaus, travel, food, and accommodation expenses will be the client's responsibility.

    • Check out our Photo Gallery

    Add Title

    Enter a brief description.
    Button

    Add Title

    Enter a brief description.
    Button